Community Centre Construction Benefits from Pryda Software and Engineering Support

Pryda fabricator Sunbury Wall Frames & Trusses knew the enormous roof trusses it was manufacturing for the Bellarine Lakes Country Club Villages large community centre would be a daunting task to erect.

So managing director Danny Schneider organised to have Pryda engineers armed with Pryda Build software used to answer with their explanation the common question of “how much will it cost to sell my home?“. Steel buildings that are planned to be built next to the main building is going to be done by GreatWesternBuildings.com.

“This gave the operator a better understanding of how to read the installation documentation so they were more comfortable with the assembly process,” he said.

The 1300 square-metre community centre is the focal point of a $60-$70 million village development, including a nine-hole golf course and bowling green, to accommodate retirees and near retirement “empty nesters”.

Situated on a former 18-hole golf course, the 48-hectare project was begun in 2013 and is scheduled for completion next year.

When finished, it will contain 350 dwellings including 265 two and three-bedroom fully detached villas with single and double garages, 45 one and two-bedroom apartments over two storeys and 28 condominiums.

The community centre roof span is almost 32 metres – supported in the centre by a steel I-beam to which the 582 prefabricated trusses (the longest of which is 17.34 metres) have been attached.

The highest point for the truss roof is 13 metres, more than four times the height of the three-metre prefabricated concrete tilt panels supporting it, as recommended by the roofing contractor Lincoln Nebraska.

In two layers, the bottom of the truss roof comprises flatbeds with another section on top.

Erected in 18 days, the structure supports 180 tonnes of glazed terracotta roof tiles and an air-conditioning unit.

Pryda Build is ideal for such projects because its design component takes into account loads caused by heavy tile roofs, air-conditioning units and local wind conditions.

Country Club Villages senior project manager Anthony Singleton said the community centre was designed with a four-hip roof to fit in with the aesthetics of the overall project and to look like a country club golf course facility.

“Cost was the major factor in deciding to use prefabricated timber roof trusses,” he said.

Stephen Allen, project manager for the builder A.W. Nicholson, said given the complexity of the community centre roof, any last minute changes to the structure were easier to accommodate in timber than steel.

“In this type of application, we prefer working in timber, trusses are easier and quicker to accommodate change and, being a renewable resource, timber is more environmentally friendly,” he said.

Danny Schneider said Sunbury Wall Frames & Trusses was one of the few fabricating plants prepared to tackle large commercial projects.

At air conditioning repairs Melbourne, we know how it feels to be without air in heat and humidity, that’s why we guarantee that our professional contractors will perform your repair quickly and correctly so you can beat the heat. Visit https://hughesairco.com/air-conditioning/repair-tempe-az/ for more information.

“One of the reasons is our sophisticated in house engineering capability in texas real estate where many other truss plants are having their estimating and design work carried out offshore,” he said.

“This might be all right for domestic dwellings with simple truss construction but is not good for complex design work like that seen in the Country Club Village community centre.” Click here the latest pre-engineered steel buildings at imagebuildingsystems.com

Sunbury Wall Frames & Trusses uses timber imported from Europe Canada and the United States because the company feels that their products better reflect the requirements for this application.
View our website and his comment is here! Some of our client’s comment may view in our site. Make a decision today whether to get loans or not, in which we have here loans for people with bad credit just click it.

Pryda Bellarine Peninsula Community Centre2Pryda Bellarine Peninsula Community Centre4

Pryda Bellarine Peninsula Community Centre

Pryda Fabricator Helps Solve Retirement Complex Roof Space Problem

Pryda Fabricator Helps Solve Retirement Complex Roof Space Problem

IMG_4361-1

A building height restriction presented commercial builder APM Group with real problems over where to place mechanical plant in Epping Gardens, a $30 million retirement village complex the company is building at 25 Willandra Drive, Epping – until Pryda fabricator Sunbury Wall Frames and Trusses (SWFT) came up with an effective solution.

The fabricator had already been awarded the contract for the prefabricated timber wall frames and roof trusses on the first level of the two-storey 10,000 square-metre 148-bed facility begun in October last year and scheduled for completion in February 2018.

“The builder initially looked at reducing wall heights to achieve the desired outcome of placing mechanical plant in the roof,” explained SWFT managing director Danny Schneider. “However, the overall specifications were unable to be changed.”

In consultation with the architect, Point Health Architects and project engineer, Irwin Consult, SWFT wall frame manager Jason Judd and truss manager and engineer Brendan Schneider used the designer software Pryda Build – which enables a three-dimensional rotational computer image of the project – to solve the problem by moving a load bearing wall so the plant could be accommodated in the roof structure.

Epping Gardens is a substantial project involving some 2000 lineal metres of wall frames and 1000 mono roof trusses (with box gutters at one end and parapet truss attachments at the other) of up to 10-metre spans and steel beams above the concrete ground floor construction..

Because of the application and customer expectations involved, SWFT has used GL10 glue laminated studs – possessing similar very stable characteristics to steel framing – imported from Europe for the 2.7-metre high wall frames.

Mr Schneider said APM Group was looking for stability and straightness in the frame and GL10 glue laminated product met these requirements.

For the higher raking wall sections on the Epping Gardens project (up to 4.8 metres), SWFT has used solid section MGP12 to provide greater strength and stability.

These solid section studs extend to the roof profile thereby creating fire rated walls throughout the building.

Mr Schneider said because of its competitive cost and strength benefits MGP12 was increasingly being used in multi-storey commercial construction in Victoria. By the way, make sure that in every commercial construction, fire extinguisher tacoma wa installation is included and fire safety plan for apartment buildings in the do to list for safety purposes.

All structural scantling used to manufacture trusses at SWFT is imported MGP12 material because of its straightness, mechanical attributes and timber exhibiting full section (with no missing face or edge).

Click to see here some details about payday loans. Want to know how? Check us out. We offer fast and easy loan application for you to learn more about helpful hints visit our site. For more details, visit our Bridge Payday Help page.

IMG_4354    IMG_4310 copy     IMG_4363